+86-371-67668558 / 67662768
Company Add : No.169, North taojia Road, Zhengzhou City, China.
Heavy Hammer Crusher Overview
Brief introduction to heavy hammer crusher
Heavy hammer crusher, also named as single stage hammer crusher manufacturer and hammer crusher machine, is applied to crushing various raw materials in highways, high-speed railways, tunnels, large bridge, cement, metallurgy, building materials, coal, and chemical industry. The single stage hammer crusher manufacturer has large feeding size and small discharging size. The single hammer of hammer crusher machine has large weight, and the rotor speed is reasonable, which fully embodies the advantages of crushing light material with heavy hammer.
Feed size: 600- 1200mm
Production capacity: 160-1100t/h
The heavy hammer crusher is a new type of hammer crusher improved based on the design of the PC series crushers. Our experts combine the experimental data from the crushing test base with the latest customers' feedback and the industrial development status. Compared with other hammer crushers, the heavy hammer crusher has the advantages of large diameter, heavy hammerhead and high striking speed. This crusher overcomes the disadvantages of the abrasion problem of the hammerhead and the fracture problem of the hammer pin.
Heavy Hammer Crusher Features
Heavy hammer crusher is new type of crusher improved based on the PC series crushers, according to users' feedback. Compared with traditional hammer crusher, the heavy hammer crusher enjoys heavy hammer head, high crushing line speed and other striking features, as well as large feeding size, large crushing ratio, low maintenance costs, etc.
Heavy Hammer Crusher Working Principle
Users can adjust the distance between the grates of the heavy hammer crusher to change the material particles in order to meet different demands. The high speed rotary hammer can impact the materials high efficiently and the crusher can be used for the wet and dry crushing processes. The main working part of the heavy hammer crusher is the rotor with the hammerhead which is made up of the main shaft, round disk, pin roll and the hammerhead. The motor drives the rotor to rotate at high speed and the materials enter the crusher from the upper feeding hole. After being impact, cut and ground by the hammer, materials are crushed completely. There is a screening board installed at the bottom of the rotor. Materials with the particle size smaller than the screen holes will be discharged from the screening board. The rough particles will remain on the screen board to be impact and ground again. Then they are also discharged through the screen board.
Technical Datas of Heavy Hammer Crusher
Hongji product inquiry or order requirements, Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties. Email: firstname.lastname@example.org