Bolivian customers' glass crushing and grinding production line is mainly used for waste glass crushing and grinding, etc., to obtain glass powder with fineness of 30-425, which is used as additive for coating raw materials, glass asphalt building tiles, glass tiles, ceramic glazes, etc., to realize the purpose of secondary utilization of waste, recycling and environmental protection.
Process Flow:
Bolivian customers' materials are mainly waste glass bottles of solid waste. First, it needs to be primarily broken, and then it goes into the sand washer for screening and washing to remove dust, iron blocks, plastic and other debris.The clean broken glass pieces are transported to the storage yard by the belt machine for drying, and the dried glass pieces are sent to the grinding machine for grinding, and the materials are packed by the baler, and then transported to the destination by truck.
Details of the case:
Materials to be processed: Waste Glass
Feed Material size: 100-200 mm
Finished Product size: 30-425 mesh
Production Capacity: 1-3tons/hour
Configure Equipment: YGM75 high pressure roller mill, PC400*300 hammer crusher, XSD2610 sand washer, 2 belt machines
Case Site: Bolivia, South America
Case Advantage:
Choice of hammer crusher: It is suitable for crushing medium hardness materials such as limestone, slag, coke, coal and glass in cement, chemical industry, electric power industry and metallurgy industry. Especially have very good broken effect of the broken glass.
Choice of wheel bucket type sand washer: The impeller drive bearing device is isolated from water and water receiving materials to avoid the damage of bearings caused by water, sand and pollutants. This machine has almost no wearing parts except screen. It has long service life and long term of maintenance.
Choice of YGM75 high pressure roller mill: IN the main body of the high-pressure suspension roller mill, the high-pressure spring of 1000-1500kg pressure is tightened on the suspension roller hanger. After starting work, the grinding roller rotates around the main shaft, and under the action of high-pressure spring and centrifugal force, rolling close to the grinding ring, the rolling pressure is 1.2 times higher than the same dynamic conditions of Raymond powder machine, so the output is greatly increased.
Feedback:
Considering the site environment, Hongji mining machinery technicians designed the sedimentation tank for the customer. Since there are many sunny days throughout the year in Bolivia, we have reduced the drying process for our customers and saved the cost. At present, the whole set of process equipment has been running for about 3 years, achieving considerable income. The customer came to visit Hongji again, and is considering buying another set of the latest European version of the mill, which output is 8 times of the original, 15-25 tons per hour.
Service support:
- 48-hour idling test machine before leaving the factory.
- You can take the materials to the factory test machine.
- We will customize the solution according to your needs.
.jpg)
